Новая машина скорой помощи Mercedes-Benz Sprinter

EN1789 Certified Mercedes Sprinter Ambulance | ISO 9001:2015 | Direct Export Worldwide

Product Overview
The Mercedes Sprinter Ambulance is a professionally converted emergency medical vehicle built on the world-renowned Sprinter chassis. Designed to meet EN1789 European standards for medical vehicles, this ambulance delivers exceptional reliability, safety, and operational efficiency for EMS providers worldwide.

Infinity Chassis Units performs complete ambulance conversions including patient compartment design, medical equipment integration, electrical systems, and certification documentation.

Key Specifications
Specification Details
Chassis Mercedes-Benz Sprinter (316, 319, 519 models)
Wheelbase Long (3,665 mm) or Extra Long (4,325 mm)
Roof Type High roof (standing access)
Engine 2.0L or 2.2L CDI Turbo Diesel
Power 163 HP – 190 HP
Transmission 7G-TRONIC Plus 7-speed automatic or 6-speed manual
Drivetrain Front-Wheel Drive, Rear-Wheel Drive, or 4×4
Gross Vehicle Weight 3.5 – 5.5 tons
Patient Capacity 1 stretcher + 2-3 seated or 2 stretchers (specific layout)
Crew Capacity Driver + 1-2 medical attendants
Available Configurations
Type A – Patient Transport Ambulance (BLS)
Designed for non-emergency patient transport and basic care.

Suitable for dialysis transport, hospital discharges, clinic visits

Basic medical supplies and oxygen therapy

Patient monitoring (basic vitals)

Manual or hydraulic stretcher

Attendant bench seating

Type B – Emergency Ambulance (Basic Life Support)
Equipped for emergency response and 911 services.

AED defibrillator

Basic and advanced airway equipment

Emergency lighting and siren system

Oxygen supply with multiple outlets

Spinal immobilization devices

First response medical kit

Type C – Mobile ICU (Advanced Life Support)
The highest level of pre-hospital care, functioning as a mobile intensive care unit.

Advanced cardiac monitor/defibrillator (12-lead ECG, EtCO2)

Transport ventilator (adult, pediatric, neonatal modes)

Infusion pumps (2-4 channels)

Video laryngoscope for advanced airway

Onboard oxygen system with 2,000+ liters capacity

Pure sine wave inverter (1,500W – 3,000W)

Telemedicine capabilities

Isolation capability for infectious patients

Patient Compartment Features
Interior Dimensions
Feature Measurement
Interior length 3,500 – 4,200 mm
Interior height 1,900 mm (standing access)
Interior width 1,750 mm
Standard Equipment
Antibacterial, easy-to-clean wall and floor surfaces

LED procedure lighting (white and red night mode)

HVAC system with independent patient compartment control

Medical grade electrical outlets (12V, 24V, 110V, 230V)

Oxygen and suction outlets (2-4 points)

Secured storage cabinets for medical supplies

Attendant seats with 3-point safety belts (1-2 seats)

Stretcher mounting system with floor locks

Communication system (interior/exterior speakers)

Two-way radio or cellular communication

Optional Equipment
Stretcher loading system (hydraulic or electric)

Medical equipment mounting solutions

Additional oxygen cylinders or central system

Blood warmer or infusion warmer

External storage compartments

Rear-view camera system

GPS tracking and fleet management system

Traffic assist and emergency vehicle pre-emption

Exterior Features
Feature Description
Warning lights LED lightbar (front), LED modules (rear, side, grille)
Siren Multi-tone electronic siren with public address
Retro-reflective markings High-visibility Battenburg or custom livery
Emergency lettering “AMBULANCE” (front, rear, sides) – reversible as required
Exterior storage Optional side compartments for equipment
Step bumper Rear step bumper for easy access
Ground clearance Standard or increased for off-road variants
Window configuration OEM glass or panel van with window cutouts
Safety and Compliance
EN1789:2020 Compliance
All Infinity Chassis Sprinter ambulances are engineered to meet EN1789:2020 standards, covering:

Structural strength and rollover protection

Electrical safety and medical grade isolation

Interior ergonomics for paramedic workspace

Patient compartment temperature control (16-25°C capability)

Secure stowage for medical equipment (tested for 10G deceleration)

Weight distribution and vehicle stability

Additional Safety Systems
Mercedes-Benz advanced driver assistance (standard on chassis)

Active Brake Assist

Crosswind Assist

Attention Assist

Blind Spot Assist

ESP (Electronic Stability Program)

Airbag system (driver, passenger, side)

Chassis Options
Sprinter 316 CDI
Feature Specification
Engine 2.0L or 2.2L 4-cylinder diesel
Power 163 HP
Torque 360 Nm
GVWR 3.5 – 4.0 tons
Drivetrain FWD or RWD
Sprinter 319 CDI
Feature Specification
Engine 2.0L or 2.2L 4-cylinder diesel
Power 190 HP
Torque 440 Nm
GVWR 3.5 – 4.0 tons
Drivetrain FWD or RWD
Sprinter 519 CDI
Feature Specification
Engine 2.0L or 2.2L 4-cylinder diesel
Power 190 HP
Torque 440 Nm
GVWR 5.0 – 5.5 tons
Drivetrain RWD or 4×4
4×4 Off-Road Mercedes Ambulance
For rural, mountainous, or disaster response operations, the Sprinter 4×4 ambulance offers:

Permanent all-wheel drive with low-range transfer case

Increased ground clearance

Off-road suspension and underbody protection

Heavy-duty cooling system for hot climates

All-terrain tires

Reinforced chassis for rough terrain

Ideal for: Mountain rescue, rural EMS, mining operations, disaster response, military applications

Electrical System
Standard Configuration
Component Specification
Primary battery Mercedes-Benz OEM (starting)
Secondary battery AGM deep cycle (medical equipment)
Battery separator Automatic isolation
Inverter 1,500W pure sine wave
Charging system Alternator + shore power
Medical outlets 230V AC, 12V DC, USB
Optional Upgrade (Type C / ALS)
Component Specification
Secondary battery Lithium-ion or dual AGM
Inverter 3,000W pure sine wave
Shore power Automatic transfer switch
External charging port Weatherproof connector
Monitoring panel Digital display for battery status
Climate Control System
Feature Specification
Front HVAC Mercedes-Benz OEM (driver cabin)
Patient compartment Independent roof-mounted AC (electric or engine-driven)
Heating Independent fuel-fired heater (parking mode capability)
Temperature range 16-25°C (maintainable in extreme conditions)
Air exchange Minimum 6 air changes per hour
Filtration Optional HEPA for infectious patients
Customization Options
Infinity Chassis offers complete customization based on your operational requirements:

Medical Equipment:

Specific monitor, ventilator, or infusion pump brands

Custom equipment mounting and storage

Specialized pediatric or neonatal configurations

Bariatric patient adaptations

Exterior Design:

Custom livery and branding

Specific warning light configurations

Country-specific emergency markings

Reversible lettering for export markets

Interior Layout:

Modified seating arrangements

Additional storage solutions

Specific stretcher brand compatibility

Left-hand drive (LHD) or right-hand drive (RHD)

Quality Assurance Mercedes Ambulance
Certification Status
ISO 9001:2015 Certified
EN1789:2020 Certified
CE Marking Compliant
In-house R&D Yes
Post-conversion testing Full road test + systems validation
Each ambulance undergoes:

Electrical system testing (isolation, grounding, load)

Patient compartment temperature validation

Weight distribution and axle load measurement

Road test (braking, handling, warning light function)

Medical equipment integration verification

Comprehensive documentation package for registration

Export and Logistics
Infinity Chassis exports Mercedes-Benz Sprinter ambulances to markets worldwide including:

Middle East (UAE, Saudi Arabia, Qatar, Oman, Kuwait, Jordan)

Africa (Nigeria, Kenya, Ghana, Tanzania, South Africa)

Europe (EU and non-EU countries)

Asia (Philippines, India, Malaysia, Indonesia)

CIS countries and Central Asia

Shipping Methods:

Ro-Ro (Roll-on, Roll-off) vessel

Container shipping (40ft high cube)

Air freight (for urgent deliveries)

Warranty and After-Sales Support Mercedes Ambulance
Coverage Duration
Mercedes-Benz chassis 2 years / unlimited km (OEM)
Infinity Chassis conversion 2 years
Medical equipment Manufacturer warranty
After-Sales Services:

Remote technical support

Spare parts supply

Training documentation

On-site training (available upon request)

Ordering Process
Step Process
1 Consultation – Define operational requirements and budget
2 Technical design – Layout, equipment, and specifications
3 Quotation – Detailed proposal with pricing
4 Order confirmation – Deposit and production scheduling
5 Production – 90-150 days (depending on configuration)
6 Quality control – Testing and certification
7 Shipping – Logistics coordination to destination
8 Delivery – Documentation and after-sales support
Contact Information
Location Contact
Turkey (HQ) показать контакты
Dubai (Sales Office) показать контакты
Email показать контакты
WhatsApp / BOTIM показать контакты
Website показать контакты
Office Hours: Monday – Friday, 09:00 – 18:00 (GMT+3)

Factory: Saray Neighborhood, 36th Street No:12/D, Kahramankazan, Ankara – Türkiye

Head Office: Cinnah Avenue No:71, Floor 7, Office 7, Çankaya, Ankara – Türkiye

Dubai Branch: Green Space Business Centre, Office 113-05, Ras Al Khor, Dubai – UAE

EN1789 Certified | ISO 9001:2015 | Direct Export Worldwide